Want to Pass 300-075 Exam In Next HOURS? Get it now →
August 2, 2017

cisco 300 075 (31 to 40)

Refined of 300 075 vce exam price materials and testing bible for Cisco certification for client, Real Success Guaranteed with Updated 300 075 dump pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!

Q31. Scenario There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

The intercluster URI call routing no longer allows calls between sites. What is the reason why this would happen? (Choose two) 

A. Wrong SIP domain configured. 

B. User is not associated with the device. 

C. IP or DNS name resolution issue. 

D. No SIP route patterns for cisco.lab exist. 

Answer: C,D 


Q32. What user profile is used to define the settings for a user on login? 

A. Device Profile 

B. Group Profile 

C. Pool Profile 

D. Specific Profile 

Answer:


Q33. Which statement best describes globalized call routing in Cisco Unified Communications Manager? 

A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix. 

B. Call routing is based on numbers represented as an E.164 with the + prefix format. 

C. All called numbers sent out to the PSTN are in E.164 with the + prefix format. 

D. The CSS of all phones contain partitions assigned to route patterns that are in global format. 

E. All phone directory numbers are configured as an E.164 with the + prefix. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E For the destination to be represented in a global form common to all cases, we must adopt a global form of the destination number from which all local forms can be derived. The + sign is the mechanism used by the ITU's E.164 recommendation to represent any PSTN number in a global, unique way. This form is sometimes referred to as a fully qualified PSTN number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1153205 


Q34. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.) 

A. Media Resource Group List. 

B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS. 

C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS. 

D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM. 

E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM. 

Answer: B,D 


Q35. When configuring a video ISDN gateway, which two actions are requirements for the Cisco Preferred Architecture for Enterprise Collaboration? (Choose two.) 

A. Use SIP instead of H.323. 

B. Perform dial string manipulation on Cisco Unified Communications Manager. 

C. Use an * (asterisk) at the end of each ISDN number, as a suffix. 

D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix. 

E. Use H.323 instead of SIP. 

Answer: A,B 


Q36. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager? 

A. to allow for supplementary services such as hold, transfer, and conferencing 

B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server 

C. when you need the ability to grow support by using DSPs 

D. when you want to only use Cisco Unified Communications Manager resources 

Answer:


Q37. Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST failover? 

A. ccm-manager fallback-mgcp 

B. telephony-service 

C. dialplan-pattern 

D. isdn overlap-receiving 

E. voice-translation-rule 

Answer:


Q38. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? 

A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway. 

B. Normalization is done using route patterns. 

C. Normalization is done using the gateway incoming called party prefixes based on number type. 

D. Normalization is done using the gateway incoming calling party prefixes based on number type. 

E. Normalization is achieved by local route group that is assigned to the MGCP gateway. 

Answer:


Q39. Which statement about the host portion format in Cisco Unified Communications Manager URI dialing is false? 

A. The host portion cannot start or end with a hyphen. 

B. The host portion is not case sensitive. 

C. The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods. 

D. The host portion can have two periods in a row. 

Answer:


Q40. When you use the Query wizard to configure the trace and log central feature to collect install logs, if you have servers in a cluster in a different time zone, which time is used? 

A. TLC adjusts the time change appropriately. 

B. TLC uses its local time for all systems. 

C. TLC queries for the time zone as part of configuration. 

D. TLC produces an error and must be run remotely. 

Answer:



see more http://www.ubraindumps.com/300-075-dumps/